Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13702747

- Product Categories
- Friendly Links
- home > Supply > Polyurethane waterproof coating interior, Manulife new waterproof polyurethane waterproof coating
Information Name: | Polyurethane waterproof coating interior, Manulife new waterproof polyurethane waterproof coating |
Published: | 2015-06-30 |
Validity: | 0 |
Specifications: | Any |
Quantity: | |
Price Description: | |
Detailed Product Description: | Seven, the amount of: the number and thickness of the coating to the design requirements prevail, the general requirements in 2-3KG, between the amount of the thickness of 1.2-1.5mm. VIII Note: 1, must pay attention to weather changes, not rain within four hours after waterproof material coating; it must be dry before brushing on a wash down together; 2, the temperature is not easy to paint a negative construction; 3, Use Figure 1 takes Stir 1, two-component polyurethane waterproof coating construction procedures and methods 1) Basic process a). substrate should be solid, polyurethane waterproof coatings, Wood investment agents smooth surface, no blisters, voids, and should be clean and dry. If blisters, voids, should wipe cement mortar, polyurethane waterproof coating single group, requires the use of smooth calendering or incorporated into the cement content of 10% -20% polymer emulsion modulation putty filling gelling. b). In case of sanitary ware, wall bushing and so on, 951 polyurethane waterproof coating, shall be required to install securely tighten smooth. 2) coating the primer to the primary surface dust and debris cleaned up after, and then the two-component polyurethane coating by Group A: B Score: thinner = 1: (1.5-2.0): 2.0 ratio (mass ratio, the same below), or required by the product specification Stir after mating, and then long to roll brush dipped in the mixed material, even brushing the grass-roots level in the cleaned surface shall not accumulate or grin bottom brushing, coating Brush amount of 0.2kg / m2 or so. After brushing should be dried and cured more than 4h before proceeding to the next step of construction. Polyurethane waterproof coating interior, Manulife new waterproof, waterproof polyurethane coating provided by Manulife Shouguang City, new waterproof materials plant. Manulife Shouguang City, new waterproof materials plant (www.sghongli.com) (www.sghongli.com) Shandong Weifang, waterproof, moisture-proof material leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, the maximum Limits to meet customer needs. Manulife new waterproof leadership in the staff warmly welcome all inquiries negotiations to create new waterproof Manulife better future. |
Admin>>>
You are the 14100 visitor
Copyright © GuangDong ICP No. 10089450, Manulife Shouguang City, new waterproof materials plant All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 14100 visitor
Copyright © GuangDong ICP No. 10089450, Manulife Shouguang City, new waterproof materials plant All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility